ARDEX TWP Patching and Finishing Compound for Vertical Concrete Walls 10 lb 12508

ARDEX TWP™ is a Portland cement-based, trowel-grade finish used to fill and smooth interior and exterior vertical concrete surfaces, including tilt-up walls, precast or cast-in-place concrete panels, and others concrete or masonry surfaces before sealing or painting.

Important features

• Use to fill and smooth interior and exterior vertical concrete or masonry surfaces
• Made from Portland cement
• Easy to prepare and apply
• Cures quickly without shrinkage

Facility

Mixing ratio: 2.4 liters (2 1/2 quarts) of clean water per 4.54 kg bag
(10 lbs). For smaller amounts, use 2 parts powder to 1 part water

Quantities required: 9.3 to 14 m ² (100 to 150 sq. ^ft .) per on a smooth support bag for thin plaster (approximately)
3.09 m ² (33.3 sq. ^ft .) per bag at 3.2 mm (1/8 in.) thickness
1.54 m ² (16.6 sq. ^ft .) per bag at 6.4 mm (1/4 in.) thickness

• Working time: 15 to 20 minutes
• Time before: 15 to 60 minutes, depending on sealing or painting on site conditions
• VOC: 0 g/L- calculated, SCAQMD 1168
• Packaging: Net weight 4.5 kg / 10 lbs
• Storage: Store in a cool, dry place. Do not expose the bags to the sun. To protect unused product, remove air from bag and seal tightly.
• Shelf life: 9 months if unopened.
• Warranty: ARDEX Engineered Cements standard limited warranty applies.