• Top coat on flakes

• Will never turn yellow

• Cures slower than Poly Fast

• For indoor or outdoor

Description

• Two-component polyaspartic resin (part A and part B)

• Base coat or finish

• 20-25 minute working time

• Finished

  • transparent or light gray (see flakes and colors )

  • resistant

  • for use with flakes (see flakes and colors)

  • does not turn yellow

• Standard size: 2 gallons 7.57 liters

• Weight: 9.11 kg 20.08 lbs

Instructions

Before using this product, please carefully read the MSDS on the boiler.

​

READ THE WARNINGS CAREFULLY

Pre-mix the Part A component resin until uniform product and color are achieved. Empty the component part B hardener into the component A resin. Mix the two components for approximately 2-3 minutes using a drill at low speed 3 (300-450 rpm) to minimize the creation of air bubbles. Thinner PE can be added to increase application time.

Manufacturer's website www.epoxyeureka.com

Poly Eureka Data Sheet