Ardex
ARDEX Ardifix - Polyurethane Joint and Crack Filler 12918
ARDEX Ardifix - Polyurethane Joint and Crack Filler 12918
Couldn't load pickup availability
Share
Polyurethane based, rigid, low viscosity joint and crack filler
The ARDEX ARDIFIX TM product is a two-part polyurethane-based filler compound for cracks, control joints, chips and craters in interior or exterior application. It is ideal for sealing cracks and saw cuts prior to installing ARDEX moisture control systems, underlayments and toppings.
Important features
- Two-part polyurethane
- The extremely low viscosity allows deep penetration.
- Seals very fine cracks
- Mix with sand for larger cracks or filling chips and craters
- Use indoors or outdoors.
- Ideal for filling cracks and control joints (saw cuts) before installing ARDEX moisture control systems, underlayments and toppings.
- Super fast setting - starts setting after just 2 minutes.
- Functional after 10 to 15 minutes
- Can be smoothed by grinding after 45 minutes.
- 100% solids, contains no VOCs, non-flammable
ARDEX ARDIFIX ™ TECHNICAL DATA
Facility
Recommended thickness: No limit
Coverage: Varies depending on the depth of the area to be filled.
Yield
Time of use: about 2 minutes
Percent Solids: 100% by weight
Tensile Strength (ASTM D638): Approximately 28.6 N/mm2 (4150 psi)
Elongation (ASTM D638): 6%
Tear Strength Die C (ASTM D624): 425.5 N/cm (243 psi)
Shore D hardness: 70
Viscosity: 60 Pa-s
Dry to the touch: about 10 minutes
Full use: 45 minutes
VOC: 0 g/l, calculated, SCAQMD 1168
Storage: Store in a dry place between 18°C and 32°C (65°F and 90°F). Do not leave containers exposed to sunlight. Protect from freezing. Protect from heat.
Packaging: 627ml (21.2oz)
Shelf life: One year if unopened
Warranty: ARDEX LP Standard Limited Warranty
